Print Page
Send to Friend
ASL 3000
|
| DVI-2000 |  |
|
|
|
|
|
|
|
|
| OV12 | |
|
|
|
|
|
|
|
|
| MUX | |
|
|
|
|||||
| TMU | |
|
|
|
|||||
| DDD8 |  |
||||||||
| DCC | |
||||||||
| MDI | |
|
|
|
|
|
|||
| DOAL | |
|
|||||||
| LCB | |
|
|||||||
| HVS | |
|
|
||||||
| MVS | |
|
|||||||
| OFS | |
|
|||||||
| PV3 | |
|
|
|
|||||
| QMVI | |
|
|
||||||
| ACS |  |
|
|
|
|||||
| AWG | |
|
|
||||||
| AVD | |
|
|
||||||
| BB4-30 | |
|
|
||||||
| MVNA RF16 |
 |
|
|
|
DVI-2000 Dual Voltage/Current Source (DVI)
Debug, Characterization. The DVI-2000 is ideal for measurement applications such as supply and ground current, and continuity, leakage, line, and load regulation. The DVI-2000 is a two-channel voltage and current source with low drift and four-quadrant capabilities. The two channels per card provide full Kelvin connections. Each channel can operate independently or can be used together to provide differential measurements. In differential meter mode, access to extremely low voltage ranges enables precise voltage measurements. Several voltage and current ranges are available, maintaining high accuracy throughout the complete instrument range. The accuracy and quick settling times of the DVI enhance fast test times.
Octal/Voltage Current Source (OVI 2)
Production Test. The Octal/Voltage Current Source is an eight-channel, four-quadrant low drift voltage and current source. It has eight autonomous channels per card with full Kelvin connections. Several voltage and current ranges sustain instrument accuracy across its full power band. The OVI2 can supply ±20 V at 30 mA on all channels simultaneously. The OVI2 also has alarm and fault logic.
Multiplexer (MUX)
Production Test. All of our ASL Series instruments can be routed through our 32 relay Multiplexer, optimizing connectivity for any measurement. The MUX has eight banks of relays with four relays per bank. Connect banks to adjacent banks, to system ground, or to a user bus. The relays are commonly used to switch in DUT loads or external circuitry.
Time Measurement Unit (TMU)
Production Test. The Time Measurement Unit (TMU) is a general purpose instrument that measures time and event-related parameters such as rise time, fall time, and duty cycle. The instrument has programmable start, stop, and enable inputs that provide great flexibility for measuring analog and digital signals over a wide input level range and bandwidth.
Dynamic Digital Driver (DDD8)
Production Test. The Dynamic Digital Driver is an eight-channel digital I/O card. It provides cost-effective test coverage for elementary mixed-signal applications. The DDD8 generates period and timing edges with fundamental edge placement. The convenient onboard memory can store multiple patterns. Simple pattern control allows the user to start, stop, and loop clock pattern data. The DDD8 facilitates coherent testing by providing external triggers and clocks to other tester resources, such as the ACS and DIG5.
DATA CONVERTER CARD (DCC)
The Data Converter Card (DCC) tests two types of converters: analog-to-digital (ADC) and digital-to-analog (DAC). The DCC features a 16-bit measurement system that allows measurements to be taken on voltage in (Vin), current in (Iin), and contact DUT input pins.
MODULAR DIGITAL INSTRUMENT (MDI)
Production Test. The Credence Modular Digital Instrument (MDI) is a high-performance digital subsystem. The MDI employs an innovative sequencer-per-site architecture that enables true parallel testing with unsurpassed throughput. It has features to handle even the most complex testing challenges: on-the-fly period and timeset switching, sequencer instruction per vector, simultaneous fail and data capture, mixed-signal synchronization, and a built-in timing measurement unit.
DUAL OP AMP LOOP (DOAL)
The Dual Op Amp Loop is an application-specific instrument designed to test operational amplifiers and comparators.
LCB
Octal Low Leakeage measurement unit. Ranges from 100pA to 10nA.
HIGH VOLTAGE SOURCE (HVS)
The High Voltage Source (HVS) instrument is a programmable high-voltage, low-current floating source.
MEDIUM-VOLTAGE SOURCE (MVS)
The Medium-Voltage Source is a medium-voltage, medium-current floating source instrument.
OCTAL FLOATING SOURCE (OFS)
The Octal Floating Source is a low-voltage, high-current floating source.
PULSED VOLTAGE / CURRENT SOURCE (PV3)
The Pulsed Voltage / Current instrument is able to generate up to 100 A pulses.
QMVI
Quad Medium Voltage Current Source. 4 channel, 300V and 50mA voltage and current source.
ALTERNATING CURRENT SOURCE (ACS)
Debug, characterization. The Alternating Current Source (ACS) is a versatile arbitrary waveform generator. Sine wave, square wave, ramp and multi-tone waveforms can be produced. The ACS is suitable for device parameters such as PSRR, CMRR, gain; for time domain tests such as signal delay or slew rate; and for frequency domain tests such as THD and SNR. An array of onboard filtering provides signal conditioning and the ACS also has an RMS meter with numerous inputs and ranges. Triggering capability enables synchronization and the external clock input enables coherent AC measurements.
BASEBAND ALTERNATING WAVE GENERATOR (BBAWG)
Base Band Waveform Generator and Digitizer. Waveform source and digitizer for differential I/Q base band applications.
AUDIO VIDEO DIGITIZER (AVD)
Audio Video Digitizer. Digitizer for high resolution audio and video applications.
BB4-30
Base Band Waveform Generator and Digitizer. Waveform source and digitizer for differential I/Q base band applications.
MVNA RF16
Credence's RF measurement option for the Diamond 40 includes 16 ports along with an integrated per-receiver DSP architecture that delivers fast test times in multi-site applications with full RF test capabilities for a wide range of wireless devices up to 6 GHz in frequency. When combined with various digital, mixed-signal, and analog instrument options, the MVNA RF measurement option allows the testing of highly integrated mobile phone devices and the anticipated single chip cell phone.